Powered By E-MOTION
EZDT17 Daughter Boards allow the user to drive a second stepper motor, bidirectional DC load or Logic level loads. One of the daughter board is simply plugged into the expansion connector located on the EZHR17EN.
Allows easy daisy-chaining of the 4 Wire Bus up to 8 drives
Allows easy daisy-chaining of the 4 Wire Bus
DF11 crimped wires in 4 different colors, 8" length
starter kit cables
EZ17 / EZHR17 3 Hole Enclosure allows for easy mounting to NEMA 17 size motors.
EZHR17EN 4 Hole Enclosure allows for easy mounting to NEMA 17 size motors.
Converts from RS232 on PC Com Port to 4 Wire RS485 Based EZBus
Converts from USB on PC Com Port to 4 Wire RS485 Based EZBus
AMC: DigiFlex® Performance™ CANopen Drive Mounting Card MC1XDZC03, Peak current 40A
AMC: DigiFlex® Performance™ CANopen Drive Mounting Card MC1XDZC03-HP1,Peak current 60A
AMC: DigiFlex® Performance™ CANopen Drive Mounting Card MC1XDZC03-QD, Peak current 25A
AMC: DIGIFLEX® PERFORMANCE™ Modbus RTU, RS-485/232 Drive Mounting Card MC1XDZR03 Peak current 25A
AMC: DIGIFLEX® PERFORMANCE™ Modbus RTU, RS-485/232 Drive Mounting Card MC1XDZR03-HP1 Peak current 60A
AMC: DIGIFLEX® PERFORMANCE™ Modbus RTU, RS-485/232 Drive Mounting Card MC1XDZR03-QD Peak current 25A
Assmann WSW Components: Communication Cables (EtherCAT/EtherNET)
Careful Magnetism & Electron Group: EMI Soft Ferrite Core (CF Type)
Product Information:
Main Feature: EMI use
Initial Permeability: 400-800
Careful Magnetism & Electron Group: EMI Soft Ferrite Core (DnH Type)
Model No.
Quantity
Items in stock
1) ACJ-CK 2) ADP-CK 3) SER-CK
4) XSJ-CK 5) XSL-CK6) XTL-CK7)ACJ/XSL-NK
18
0
5
122
Description
Ordering Guide
ACJ-CK
ACJ-NC-01
ACJ-NT ACJ-SK ACJ-NK
Connector Kit
CANopen cable assembly, Connector J1 to flying leads with crimps, 1ft length.
CANopen Network Terminator Serial Cable Kit CANopen Network Kit
ACJ Series
ADP-CKADP-NT
Connector KitCANopen Network Terminator
ADP Series
AEK-CK-02
Module Connector Kit Dual Axis
AEK Series
BE2-CK
BE2 Series
BEL-CK
Solder Cup Connector Kit (1-2 weeks ARO)
BEL Series
CAN-PCI-02
Dual-channel Can Interface Card for PCI 2.2 Sockets.
Driver Software can be downloaded from the Copley website.
KDK-CK
KDK Series
R20-CK
R20 Series
R21-CK
R21-FC-10
R21-NC-10
R21-SK
Connector Kit Feedback Cable Assembly CANopen Cable Assembly. Connector J1 to flying leads with crimps, 10 ft length.
Serial Cable Kit. Connector J5 to DB9 Female, 6ft length.
R21 Series
RDK-090-01
High Current Accelnet module development kit
ACM Series
SEK-CK-01
StepnetPlus Module Connector Kit, Single-Axis EtherCAT
SEK Series
SER-CKSER-USB-RJ11
Serial Cable Kit to be used with CME2 softwareUSB to Serial RS232
SER Series
TEL-CK
Solder Cup Connector Cup
TEL Series
XE2-CK
XE2-NC-10
Solder Cup Connector Kit Ethercat network cable, 10 ft length
XE2 Series
XEL-CK
Solder Cup Connector Cup (1-2 weeks ARO)
XEL Series
XP2-CK XP2-NK
Connector Kit CANopen Network Kit
XP2 Series
XSJ-CK XSJ-NK
XSJ Series
XSL-CK XSL-NK
XSL Series
XTL-CK XTL-FA-01XTL-FK
Connector Kit Edge Filter AccessoryEdge Filter Connector Kit
XTL Series
4) XSJ-CK 5) XSL-CK 6) XTL-CK 7)ACJ/XSL-NK
1 2 2
Model No.:ACJ-CK, ACJ-NC-01, ACJ-NK, ACJ-NT, ACJ-SK, ADP-CK, AEK-CK-02, BE2-CK, BEL-CK, CAN-PCI-02, KDK-CK, R20-CK, R21-CK, R21-FC-10, R21-NC-10, R21-SK, RDK-090-01, SEK-CK-01, SER-CK, SER-USB-RJ11, TEL-CK, XE2-CK, XE2-NC-10, XEC-CK, XEC-NC-01, XEC-NC-10, XEL-CK, XP2-CK, XP2-NK, XSJ-CK, XSJ-NK, XSL-CK, XSL-NK, XTL-CK, XTL-FA-01, XTL-FK
Copley Controls: Single Channel CAN PCI Express Interface Card CAN-PCIE-01
Continuous Current: 0A
A highly cost-effective, dual-channel CAN card makes the connection between Copley Controls’ distributed control software and CANopen servo and stepper drives. The two independent CAN ports are galvanically isolated to provide greater noise immunity in industrial environments. An on-board microcontroller off-loads tasks from the host computer enabling faster system performance. PCI compliant, it is compatible with both 3.3VDC and 5VDC computers.DESCRIPTION
The PCIe-CAN is a single channel CAN interface card for the PCI Express bus. The CAN interface is galvanically isolated to protect the PC hardware and provide better noise immunity in industrial environments. The card incorporates a high performance 32-bit RISC processor. This processor handles all low level details of interfacing with the CAN hardware, offloading this task from the host processor. A 4Kbyte dual-port RAM is used to buffer messages to and from the host processor. This memory space provides room for 10 transmit and 164 receive CAN messages. The on-board processor synchronizes it’s local clock to the host processor clock. All received messages are time stamped using this clock with 1 microsecond accuracy. Transmitted messages may also be time stamped with their actual transmit time. This allows for simple implementation of the CANopen network synchronization protocol (DS301 object 1013h). Device driver support is provided for Windows and Linux. CANview bus monitoring software is available for both Windows and Linux hosts.ON-BOARD PROCESSOR
Many inexpensive CAN interface cards are little more then a PCI Express interface chip and one or more CAN controllers such as the SJA1000 from Philips. Cards such as this provide very little buffering on board and require the host processor to retrieve incoming messages very quickly or data will be lost. Desktop operating systems such as Windows or Linux do not guarantee low latency response to external events, so at times of high bus activity it is common for inexpensive CAN interface cards to lose messages. The on-board processor provided on the CAN-PCIe-01 interface card solves this problem by handling each CAN message as it’s received and storing them in a large queue. Extended periods of 100% bus utilization can be sustained at maximum bit rate with no loss of data.
DIMENSIONS (mm)
114 x 81
9 mm 10 ~ 20 PPR, Through Hole, Mechanical Panel Mount Encoder
11 mm, 12 ~ 20 PPR, Through Hole, Mechanical Panel Mount Encoder
12 mm, 12 or 24 PPR, Through Hole, Mechanical Panel Mount Encoder
