CODESYS Control for emPC-A/iMX6 Multicore SL Article no. 2302000037
CODESYS Control for emPC-A/iMX6 Multicore SL extends an existing emPC-A/iMX6 controller from Janz Tec AG, on which CODESYS Control for emPC-A/iMX6 SL is installed, to a multicore (MC) high-performance PLC. This can process its IEC application specifically on multiple CPU cores. The system is suitable for applications with demands on the real-time behavior.

Benefits

Extension of CODESYS Control for emPC-A/iMX6 SL for multicore support (all CPUs)

Extension of the CODESYS Development System for binding individual IEC applications to different CPU cores

Debugging of the multicore application within CODESYS

Fieldbus support

The fieldbuses of CODESYS Control for emPC-A/iMX6 SL are supported in single-core operation.

Single Device License: The license can be used on the target device/PLC on which the CODESYS Runtime System is installed.

Licensing

Licenses are activated on a software-based license container (soft container), which is permanently connected to the controller. Alternatively the license can be stored on a CODESYS Key (USB-Dongle). By replugging the CODESYS Key, the license can be used on any other controller

Note: In demo mode, the software runs for two hours without a license. After that, a manual restart is required.