Mitsubishi Servo Drive Unit-MDS-A-V1-20

MITSUBISHI Servo drive unit MDS-A-V1-20 1 axis type MDS with power 1.0kW and fitted with MITSUBISHI HA Servo motors of CNC Machine-tools. The characteristics of this servo drive type MITSUBISHI MELDAS MDS-D-V1-20 are:

Rated input :
-AC 200-230V 50/60Hz 0.2A / DC270-311V 7A (Input rating)

Rated output :
- 4.6A 1.0kW

This MITSUBISHI ELECTRIC MDS-D-V1-20 servo drive unit 1 axis is ready to replace your defective or faulty rive installed in your CNC Machine-tools. Each MITSUBISHI Electric MDS Servo drive unit is installed into a sealed cabinet structure as a standard. Consider each unit's heat radiation and wiring, and secure enough space for ventilation while referring to the drawing. MITSUBISHI ELECTRIC MDS-D-V1-20

Outline:
The MDS-A Series is a drive system that corresponds to the MELDAS M500 Series NC that has been developed to totally connected the servo drive and spindle drive sections. The MDS-B Series is the successor to the MDS-A Series, and has been developed to satisfy European Safety Standards.
This Series has the following features:

The MDS-C1 Series is a drive system compatible with the NC system. This high-performance, compact series is compatible with the MDS-B Series (some changes have been made)
1.Compact and lightweight
The converters that were conventionally built in each servo and spindle drive have been integrated into one unit. The drive system volume, installation area and weight have been drastically reduced with the incorporation of high density mounted electronic parts IGBT-IPM (Intelligent Power Module) and the high performance heat radiating fin.
2.Standardization of dimensions
The outline has been standardized to the book end type, and by unifying the height and depth dimensions, installation in cabinets has been made easy. Furthermore, by matching the shape with the NC unit, an integrated appearance with the NC has been realize
3.Low heat generation
By incorporating the IPM and using power supply regeneration in the servo drive, the amount of heat generated has been greatly reduce
4.High speed and precision processing
A high speed CPU has been mounted on the control PCB, and a 100,000 pulse/rotation sub micron detector has been incorporated as a standard to allow faster and more precise interpolation. By incorporating the stable position loop control (SHG control) method, having an outstanding response, the positioning time and tracking have been improved and the machine vibration during acceleration/deceleration has been reduced. The cutting performance and cutting precision during position control have been improved by using the high speed CPU also for the spindle drive.
5.High speed spindle orientation
Smooth operations and minimum orientation times have been realized by using the high speed orientation method while allows direct orientation from the high speed during the spindle drive.