Mitsubishi Servo Drive Unit-MDS-A-V2-4520
MITSUBISHI
MDS-AV2-4520 of MDS-A type to equip CNC machine tools and
driving HA series MITSUBISHI axis motors with maximum capacity of 4.5kW on
one axis and 2.0kW on the other axis. A MELDAS MDS-A-V2-4520 2-axis
drive offering the following characteristics:
Input: 44A
DC270-311V
0.2A 1PH 200/200-230V
50/60Hz
Output:
28/13A 3PH 155V 0-240Hz
Power:
4.5/2.0 kW
MITSUBISHI
MDS-AV2-4520 TESTED ON OUR MITSUBISHI TEST BENCH WITH SERVO MOTORS AND CNC
Controller feedback.
This CNC
Meldas MITSUBISHI MDS-A-V2-4520 dual axis drive is ready to replace
the defective or faulty equipment installed on your CNC machine
tools. MITSUBISHI MDS-A-V2-4520 2-axis servo drive refurbished,
tested and accompanied by a functional warranty. MITSUBISHI MELDAS
MDS-A-V2-4520
Outline:
The MDS-A
Series is a drive system that corresponds to the MELDAS M500 Series NC that has
been developed to totally connected the servo drive and spindle drive sections.
The MDS-B Series is the successor to the MDS-A Series, and has been developed
to satisfy European Safety Standards.
This Series
has the following features:
The MDS-C1
Series is a drive system compatible with the NC system. This high-performance,
compact series is compatible with the MDS-B Series (some changes have been made)
1.Compact
and lightweight
The
converters that were conventionally built in each servo and spindle drive have
been integrated into one unit. The drive system volume, installation area and
weight have been drastically reduced with the incorporation of high density
mounted electronic parts IGBT-IPM (Intelligent Power Module) and the high
performance heat radiating fin.
2.Standardization
of dimensions
The outline
has been standardized to the book end type, and by unifying the height and
depth dimensions, installation in cabinets has been made easy. Furthermore, by
matching the shape with the NC unit, an integrated appearance with the NC has
been realize
3.Low heat
generation
By
incorporating the IPM and using power supply regeneration in the servo drive,
the amount of heat generated has been greatly reduce
4.High speed
and precision processing
A high speed
CPU has been mounted on the control PCB, and a 100,000 pulse/rotation sub
micron detector has been incorporated as a standard to allow faster and more
precise interpolation. By incorporating the stable position loop control (SHG
control) method, having an outstanding response, the positioning time and
tracking have been improved and the machine vibration during
acceleration/deceleration has been reduced. The cutting performance and cutting
precision during position control have been improved by using the high speed
CPU also for the spindle drive.
5.High speed
spindle orientation
Smooth
operations and minimum orientation times have been realized by using the high
speed orientation method while allows direct orientation from the high speed
during the spindle drive.