Mitsubishi Servo Drive Unit-MDS-C1-V2-4535S

MITSUBISHI MDS-C1-V2-4535S of MDS type to equip CNC machine tools and driving HA series MITSUBISHI axis motors with maximum capacity of 4.5kW on one axis and 3.5kW on the other axis. A MELDAS MDS-C1-V2-4535S 2-axis drive offering the following characteristics:

Input: 47A DC270-311V

0.2A 1PH 200/200-230V 50/60Hz

Output: 28/16A 3PH 155V 0-240Hz

Power: 4.5/3.5 kW

This CNC Meldas MITSUBISHI MDS-C1-V2-4535S dual drive is ready to replace the defective or faulty equipment installed on your CNC machine tools. MITSUBISHI MDS-C1-V2-4535S 2-axis servo drive tested and accompanied by a functional warranty. MITSUBISHI MELDAS MDS-C1-V2-4535S

The MDS-C1-V1/V2 servo drive unit has a function to D/A output the various control data. The servo adjustment data required for setting the servo parameters to match the machine can be D/A output. Measure using a hi-coder, oscilloscope, etc.
With the MDS-C1-V1/V2 Series, control is possible with the standard servo (MDS-B-V1/V2) control mode and high-gain servo (MDS-B-V14/V24) control mode. When replacing an older model (MDS-B Series) with this series, the servo parameter settings are automatically recognized and the control mode is determined. Thus, the model can be changed from either a standard servo or high-gain servo without changing the servo parameters. When using the MDS-C1-V1/V2 unit and newly adjusting the machine, select the high-gain specifications. The high-gain specifications are set as the default.