Powered By E-MOTION
RSF Elektronik: PC Interface Cards (UFC 430AR Module)
Order Information: ID#594761-03Measurement Readout
For a comfortable issue of measured values RSF Elektronik offers PC interface cards, subdividing electronics as well as the new relaunched digital readout Z 300. Z 300 replaces the legacy model of the Z 7xx series.
Hardware
Black anodized aluminum housing for surface- or wall mounting
Dimensions: 200 x 100 x 28 mm (to outside of mounting flanges)
Safety class: IP 30
Max. operating temperature: +40 °C
Socket for external power supply
One terminal connector, male, 2-way for external power supply (10–26 VDC)
One USB connector, type B
Three D-Sub terminal strips, female, 9-pin for counter inputs
One D-Sub terminal strip, male, 9-pin for I/O signals
Power Supply
External power supply with 10 – 26 VDC, max. 500 mA
Power consumption for encoders with 5,2 V ±5%: max. 150 mA
USB-interface
USB-interface according specification 2.0
Encoder-Interface
1 TTL input for encoder interference signal
Encoder power supply: 5.2 V; max. 0.15 A
3 RS422 (line driver) or analog inputs (1 Vpp) for encoder signals and reference mark(s)
Input frequency: Encoders with TTL signals: max. 4 MHz (⇒ slope time ≥ 62.5 ns)
Encoders with analog signals (1 Vpp):
max. 300 kHz at times 20 interpolation
max. 240 kHz at times 25 interpolation
max. 300 kHz at times 40 interpolation
max. 240 kHz at times 50 interpolation
max. 300 kHz at times 80 interpolation
max. 240 kHz at times 100 interpolation
max. 120 kHz at times 200 interpolation
max. 60 kHz at times 400 interpolation
IO-Interface
Three inputs (3 – 30 V) that can be used for ref. pulse inhibit, counter load signal, synchronous or asynchronous latch signal or for special assignment.
Three outputs (TTL) to cascade several cards or for special assignment.
Two analog outputs (0 – 5 V ±0.1 V), 8 bits resolution, output resistance max. 5 mA