Powered By E-MOTION
Phytron: Stepper Motor Controller (MCC-2 Series)
Programmable controller for two axes.
The MCC-2, phytron´s freely programmable dual axis stepper motor controller, is a compact stand-alone unit (CPU, Indexer and power stage) for 2 phase stepper motors providing up to 3.5 APEAK phase current.
Controllers in the MCC series have many inputs and outputs (digital and analog) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard.
Due to the variety of available host interfaces (Ethernet, Profibus, USB etc.), the MCC can be quickly and easily integrated into existing applications.
This controller is easy to program and can operate either directly (remote) via its host interface or stand-alone (local) with the program routines stored within.
As a compact stand-alone device, it convinces especially in small experimental setups, machines and equipment, which can be dispensed in a PLC.
Technical Details
Available Models
Phytron: Stepper Motor Controller (MCC-1 Series)
Programmable controller for one axis.
The MCC-1, phytron‘s freely programmable dual axis stepper motor controller, is a compact stand-alone unit for 2 phase stepper motors providing up to 3.5 APEAK phase current.
Controllers in the MCC series have many inputs and outputs (digital and analogue) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard.
Due to the variety of available host interfaces (USB, Ethernet etc.), the MCC can be quickly and easily integrated into existing applications.
This controller is easy to program and can operate either directly (remote) via its bus or stand-alone (local) with the program routines stored within.
Phytron: Stepper Motor Controller (MCC-2 LIN Series)
Linear controller for two axes.
The MCC-2 LIN, phytron´s freely programmable dual axis stepper motor controller, is a compact stand-alone unit (CPU, Indexer and power stage) for 2 phase stepper motors providing up to 1.7 APEAK phase current.
This controller is easy to program and can operate either directly (remote) via its bus or stand alone (local) with the program routines stored within.
Phytron: Stepper Motor Power Stage (ZMX+ Series)
Stepper motor power stage with ServiceBus.
The ZMX+ is a plug-in stepper motor power stage for 19“ sub-racks with ServiceBus for motor currents up to 9 APEAK.
Due to improved design and greatly reduced power dissipation, the ZMX+ provides reliable high-precision performance with minimized heat emission.
Parameters can be manually set by switches. The ServiceBus interface allows several additional adjustments.
The ZMX+ is used in different fields of application: e.g. in inspection and test applications, labelling or packaging machines, in equipment manufacturing or in beamlines.
The ZMX+ version with a 32 pin VG connector is pin compatible with commercially available power stages. The optional ServiceBus connector is placed at the front.Technical Details
(The model with 32-pin connector, without electrical isolation and without ServiceBus is compatible to the previous ZMX)
Phytron: Stepper Motor Power Stage (MCD+ Series)
Compact stepper motor power stage with ServiceBus
The MCD+ is a bipolar power stage for driving 2 phase stepper motors. The operation parameters - phase currents, step resolution and preferential motor direction - are programmable by rotary switches or in the ServiceBus mode.
The MCD+ is designed for power supplies from 24 to 70 VDC.
The control pulse, motor direction, boost, activation and reset inputs are compatible with push-pull or open collector signals. The control inputs are electrically insulated from the supply and motor voltage.
A special feature of the MCD+ offers 3 terminals for each signal input. Thus separate input terminals for 5 V and 24 V are available.
The MCD+ is suitable for up to 450 Watts of shaft power that is ideal for controlling spindle and toothed belt drive systems for mechanical handling or assembly applications. The high step resolution makes the MCD+ the best solution for applications that have especially high demands on precision, smoothness and durability.
Phytron: Stand-Alone Controls (OMC/TMC Series)
Compact Stand-alone Controls for 1 or 2 axes and Multi-Axis Systems up to 30 Axes.
The intelligent motion controllers OMC and TMC are small, simple and compact stepper motor control units for 2-phase stepper motors up to 9 Apeak phase currents with 70 V motor PEAK voltage. The connection of external power stages allows to connect larger stepper motors e. g. 17 Apeak at 140 V motor voltage. The controllers are applicable for more complex processes and motion sequences because of the circular interpolation and changes of frequency and target position during the run.
OMC offers 16 inputs, which are electrically isolated from the controller board, and 8 overload protected outputs. TMC has 32 inputs and 16 outputs. Two signal inputs are available for each axis to connect the limit switches. The controllers can be supplied from 24 up to 70 VDC or 17 up to 50 VAC . OMC and TMC are designed for DIN rail or OMC/TMC are programmed in the well-tried MiniLog format. The user-friendly MiniLog-Comm® , Windows® PC software for configuration and programming, is included in delivery.
A Remote/Local switch makes it possible to start and execute the saved program routines without connection to the superior control. Each OMC or TMC control unit can be used in single or multi-axis mode.
Stand-alone mode for single devices.
The controller is able to execute program sequences without connection to PC.
Stand-alone multi-axis mode.
Up to 30 axes can be simultaneously operated by PC: RS 422/RS 485-4-wire bus mode.
Master-slave mode.
The connector with the address ‘0’ is defined as master. The instructions are sent from the PC to the master and from the master to the slave controllers (up to 8 axes).
Programmable stepper motor controller for 1 or 2 axes
Bipolar control of 2-phase stepper motors
Phase currents up to 9 APEAK
Supply voltage 50 VAC to 70 VDC
Step resolution up to 1/20 step
RS 232 or RS 485 interface
Programming in the well-tried MINILOG format
Analog inputs e. g. for joystick
SFI step failure indication
Incremental or absolute encoders can be connected
16 digital inputs / 8 digital outputs per axis
Interface for the BT5 AM operator panel
Compact design for DIN rail or wall mounting
New: Linear and circular interpolation of two axes
New: Change of frequency and target position during operation
New: ProfiBus interface - GSD-file
1 or 2 axes controller
Built-in power stages or optional connection of external power stages
Additional boards (for 1 or 2 axes): step failure indication SFI or AD converter
With mounted fans
DIN rail or wall mounting kit
